Digi PortServer II

90030500B Troubleshooting Page 195
Statistics
Viewing statistics
You can use the
info
command to view PortServer II’s network statistics tables or to
clear their contents (see the
Command Reference Guide
for more details). The infor-
mation in the tables includes the statistics gathered since the tables were last cleared.
Note:
All users can view statistics
.
You require root privileges to clear tables.
You can view any of the following tables by entering
info
tablename
, where
tablename
may be any of the following
• framerelay
•ip
•icmp
•tcp
• udp
Clearing statistics
You can enter the following command to clear all of the tables:
info clear