Digi PortServer II User Manual

90030500B Installation Page 31
Inspecting PortServer II
Do not unpack PortServer II until you are ready to install it. When you unpack the
shipping box, check that you have the following items:
• One PortServer II unit
• Power supply unit with integral cords
• One RJ-45 to DB-25 cable leg converter. This is intended for connecting the ter-
minal or PC on which you will configure PortServer II. You will require a null-
modem cable or adapter to provide full terminal functions using this cable.
Note:
If you require additional cables, contact your Digi International dealer or
distributor.
• This
User’s Guide
and associated
Command Reference Guide
.
• A warranty card and associated paperwork.
Examine PortServer II and power supply unit for signs of physical damage or
breakage.
If anything is missing or appears damaged, or if you encounter problems when install-
ing or configuring PortServer II, contact your dealer or distributor immediately.
Tools and equipment required
No special tools or equipment are required to install PortServer II.

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English