90030500B Troubleshooting Page 233
Wan Messages
(
Option=wan
)
1) IP Pool out of addresses, could not start <name>
More users are trying to use dynamic IP addresses than there are addresses in the IP
pool.
2) <name>: No phone numbers
The user is configured to dial out, but there are no phone numbers listed in his or her
profile.
3) login to remote failed for <name>
The script that logs the user into the remote system failed.
4) login script <scriptname> not found for <name>
A script that the user is configured to use is not defined.
5) Network connection <name> not started: verify failed.
The user is incorrectly configured. Use the
wan verify
command to find out why.
6) IP Pool out of addresses, could not start <name>
The user require an IP address to start, but there are none left in the IP Pool.
7)
<name> att
ach fail
e
d,
dro
pp
i
ng connec
tion (por
t <port>)
*Internal error* (The user could not be connected to the IP forwarding mechanism).
8) <name>: unexpected getmsg failure: <errno>
*Internal error*
9)
<nam
e>: No dlci in
formati
on
f
or port
<p
ort> dlc
i <dlci>,
aborti
ng
There is no information in the
set frdlci
table for this port/dlci pair. An entry in this
table is necessary to create a Frame Relay connection.
10) <name>:ioctl failed
*Internal error*
To Next Page
Loading...
Need help?
General