Digi PortServer II User Manual

90030500B Troubleshooting Page 223
Warning Trace Messages
ARP Messages
(
Option=arp
)
1) response for <IP address> ignored: used multicast address
The remote system’s ARP response used a multicast address, so the mapping was
ignored.
2) request timed-out for <IP address>
No ARP response was received, and PortServer II timed out.
DNS Messages
(
Option=dns
)
1) entry <name> time-out, removing from list
DNS mapping for
<name>
timed out.
Frame Relay Messages
(
Option=frame
)
1) LMI in error watch: data traffic may be stopped
An LMI fault condition has been detected. If the fault persists, data traffic may be
stopped.
2) LMI again OK: data traffic can resume
The LMI fault condition that had been detected has now cleared. Data traffic will not
be stopped.
3) LMI fault event: sequence number mismatch
A sequence number mismatch fault has occurred.
4) LMI async change: PVC <dlci> is now <state: active | inactive>
PVC
<dlci>
has changed state.

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English