Digi PortServer II User Manual

90030500B Troubleshooting Page 197
ipOutNoRoutes
The number of outgoing datagrams that were discarded because no route could be
found to transmit them to their destination. The count includes:
• Any packets counted in
ipForwDatagrams
(see below) which also meet this “no-
route” criterion.
• Any datagrams that a host cannot route because all of its default gateways are
down.
In a correctly configured network, this number should be zero or near to zero.
ipForwDatagram
The number of incoming datagrams for which PortServer II’s network was not the
final IP destination. PortServer II’s attempts to find a route to forward these datagrams
to their final destination(s) were not successful.
ipOutRequests
The total number of IP datagrams that local IP user protocols (including ICMP) sup-
plied to IP in requests for transmission.
Note:
This counter does not include any datagrams counted in
ipForwDatagrams
.
ipInReceives
The total number of incoming datagrams received by IP, including any received in
error.
ipFragCreates
The number of IP datagram fragments that have been generated as a result of fragmen-
tation at PortServer II.
ipFragOKs
The number of IP datagrams that have been successfully fragmented at PortServer II.
ipReasmFails
The number of failures detected by the IP re-assembly algorithm. These failures may
be for reasons such as time-outs and errors.
Note:
This count is not necessarily a count of all discarded IP fragments because
some algorithms (notably the algorithm in RFC 815) can lose track of the
number of fragments by combining them as they are received.

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English