90030500B Installation Page 53
Warning!
!
Do not connect a PORTS module to PortServer II while power is
switched on. This may cause severe electrical problems or dam-
age to PortServer II and the PORTS module.
Note:
You may experience performance degradation when using expansion modules
under heavy data throughput. For example, if you have a total of 64 ports, you
can drive some (but not all) ports at 115.2Kbps. The available WAN band-
width on PortServer II is approximately 3.7Mbps; the maximum port speed
for any given port is either 115.2Kbps, or whatever portion of 3.7Mbps is not
currently in use by other ports that are simultaneously active.
To Next Page
Loading...
Need help?
General