Digital Equipment VR320 - Removing the Degauss Cable from the Power Supply

3–20 Removing and Replacing FRUs
6. Disconnect the 4-wire, 4-pin degauss cable (P10)
1
from the
power supply module by pressing the tabs on the connector (J10)
(Figure 3–17).
1
MA-1036-89.DG
11
4-Wire, 4-Pin,
Degauss
Cable
To
Deflection
Module
Power Supply Module
To Video
Casting
Figure 3–17 Removing the Degauss Cable from the Power Supply