Digital Projection
E-VISION LASER 5000 SERIES USER MANUAL REV A JANUARY 2018
9
ITEM LABEL DESCRIPTION SEE PAGE
1.
IR Transmitter Transmits Infrared control signals to the projector.
2.
Power On Turns the projector on.
13
3.
PC Displays the PC source selection.
4.
HDMI Displays the HDMI1/HDMI 2/DVI source selection (toggle).
5.
USB NA
6.
Navigates and changes settings in the OSD.
Quick Menu – For Vertical Keystone.
MHL - Up
22
7.
MENU
Opens the OSD menu. (and navigates back one OSD
menu page)
22
8.
Navigates and changes settings in the OSD.
Quick Menu – For Horizontal Keystone.
MHL - Left
22
9.
Keystone Opens the Keystone menu.
10.
Navigates and changes settings in the OSD.
Quick Menu – For Vertical Keystone.
MHL - Down
22
11.
Laser
Press to operate the on-screen Laser pointer.
DO NOT POINT INTO EYES.
12.
Play or pause video/music for MHL.
13.
Reverse in set increments for MHL.
14.
Play the previous item on the programming list for MHL.
15.
Stop video/music playing for MHL.
16.
Source/ID
Alternate input source.
Combo key function for Remote Control customer code
settings (Press ID button + Number for 3 seconds).
22
17.
Auto/0
Auto adjustment for frequency, phase, and position.
Number for Remote ID setting used.
22
18.
Brightness Displays the brightness setting bar.
19.
Lamp Displays the light source selections.
20.
Freeze Freezes/unfreezes the on-screen picture.
21.
Blank/6
Makes the screen blank.
Number for Remote ID setting used.
22.
Laser Emitter Laser Emitter for the on-screen pointer. DO NOT POINT INTO EYES.
23.
Power Off Turns the projector off.
13
24.
Video/S-Video Displays the Video source selection.
25.
Network Opens the OSD Network menu.
26.
HDBaseT
Displays the HDBaseT source selection.
27.
EXIT Navigates back one OSD menu page.