page 66
Digital Projection M-Vision Laser 18K Series
Operating Guide
USING THE PROJECTOR
Rev D October 2019
Laser menu
• Power Mode
• Eco will automatically set the laser power to 80%.
• Normal will set the power to 100%.
• Set to Custom if you wish to adjust the power manually.
• Power Level
This setting is only available if Power Mode is set to Custom.
Choose a value between 20 and 100, ranging from 20% to 100% laser power.
• Constant Brightness
Once a Custom brightness has been set, then Constant Brightness can be turned
ON. This setting will maintain the brightness until the maximum laser power has been
reached. The lower the power level the longer it will be maintained.
Notes
Laser
Power Level
Power Mode
————
Normal
Constant Brightness
Off
To Next Page
Loading...
