Digital Projection M-Vision 18K Series User Manual

page 67
Digital Projection M-Vision Laser 18K Series
Operating Guide
USING THE PROJECTOR
Rev D October 2019
Setup menu
• Orientation
Choose from Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling and
Auto-front..
• High Altitude
Choose from On, Auto and Quiet.
• Standby Mode
Choose from SuperECO, ECO and Normal.
SuperECO uses minimal power and disables power ON via LAN.
ECO uses a low power setting but enables power ON via Ethernet port only.
Normal enables power ON via both HDBase-T/LAN and Ethernet ports.
• Screen Setting
Choose from 16:10, 16:9 and 4:3.
• ColorMax Setting
Set up user-defi ned color gamut values.
• Power On/Off
Access the submenu to set up automatic projector power on and power off .
• Clock Adjust
Access the submenu to set current date and local time.
• Startup Logo
Set this to On if you want the DP logo to show when the projector is fi rst switched on.
• Blank Screen
Choose from Logo, Black, Blue and White.
• Auto Source
If this setting is On, the projector will automatically search for an active input source.
• OSD Settings
Access this submenu to adjust the appearance and position of the on-screen display.
Highlight the
DOWN arrow at the bottom of the page and press ENTER/OK to navigate
to the second Setup menu page.
Notes
Auto-front automatically detects
the projector’s position and sets the
orientation accordingly.
.
Setup
High Altitude
Orientation
Screen Setting
Power On/Off
Clock Adjust
ColorMax Setting
Standby Mode
Blank Screen
Auto Source
Startup Logo
T
Auto
Auto-front
16:9
X
SuperECO
X
On
Off
Logo
X
OSD Settings
X

Digital Projection M-Vision 18K Series Specifications

General

Brand	Digital Projection
Model	M-Vision 18K Series
Category	Projector
Language	English