225
DCS-3950 series Ethernet switch manual
Global Mode
aaa enable
no aaa enable
Enables the AAA authentication function in
the switch; the ‘no aaa enable’ command
disables the AAA authentication function.
aaa-accounting enable
no aaa-accounting enable
Enables the accounting function in the
switch; the ‘no aaa-accounting enable’
command disables the accounting
function
aaa-accounting update
{enable|disable}
Enables/disables accounting update
dot1x enable
no dot1x enable
Enables the 802.1x function in the switch
and ports; the ‘no dot1x enable’ command
disables the 802.1x function.
dot1x privateclient enable
no dot1x privateclient enable
Enable the switch to force the client
software adopts Digital China private
802.1x authentication message format; the
‘no dot1x privateclient enable’ command is
used to disable this function, and thus
allow the client software to adopt standard
802.1x authentication message format;
dot1x user free-resource <prefix>
<mask>
no dot1x user free-resource
Set the limited resources can be accessed
by users; the ‘no dot1x user free-resource’
command is used to delete the limited
resources.
2. Access management unit property configuration
1) Configure port authentication status
2) Configure port access management method
Command Explanation
Global Mode
dot1x port-control
{auto|force-authorized|force-unaut
horized|vlanstyle }
no dot1x port-control
Configures 802.1x authorized status,the
‘ no dot1x port-control’ restore default
configration
Command Explanation
Global Mode