25
DCS-3950 series Ethernet switch manual
checksum’, ‘1’ for stop bit and ‘none’ for traffic control; or, you can also click ‘Revert to
default’ and click ‘OK’.
Fig 4-4 Opening HyperTerminal
Step 3 Entering switch CLI interface:
Power on the switch. The following appears in the HyperTerminal windows, that is the
CLI configuration mode for
Testing RAM...
67,108,864 RAM OK.
Initializing...
Booting......
Starting at 0x10000...
Current time is MON JAN 01 00:00:00 2001
DCS-3950-28C Series Switch Operating System
SoftWare Version DCRS-5200-28_1.2.17.0
DCNOS Version DCNOS_5.1.35.47
Copyright (C) 2001-2007 Digital China Networks Limited
http://www.dcnetworks.com.cn
DCS-3950-28C Switch (88E6218-133M) processor
28 Ethernet/IEEE 802.3 interface(s)