Digitalchina Networks DCS-3950 series User Manual

67
DCS-3950 series Ethernet switch manual
2. Configure SNMP community string
Command Explanation
snmp-server community {ro|rw} <string>
no snmp-server community <string>
Configure the community string for the
switch; the ‘no snmp-server community
<string>‘command deletes the configured
community string.
3. Configure IP address of SNMP management base
Command Explanation
snmp-server securityip <ip-address>
no snmp-server securityip <ip-address>
Configure the secure IPv4/IPv6 address
which is allowed to access the switch on
the NMS; the ‘no snmp-server securityip
<ip-address> ‘command deletes configured
secure address.
snmp-server SecurityIP enable
snmp-server SecurityIP disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
snmp-server engineid < engine-string >
no snmp-server engineid < engine-string >
Configure the local engine ID on the
switch. This command is used for SNMP
v3.
5. Configure user
Command Explanation
snmp-server user <user-string>
<group-string> [[encrypted] {auth {md5|sha}
<password-string>}]
no snmp-server user <user-string>
<group-string>
Add a user to a SNMP group. This
command is used to configure USM for
SNMP v3.
6. Configure group
Command Explanation
snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv} [[read
<read-string>] [write <write-string>] [notify
<notify-string>]]
no snmp-server group <group-string>
{NoauthNopriv|AuthNopriv|AuthPriv}
Set the group information on the switch.
This command is used to configure VACM
for SNMP v3.
7. Configure view
Command Explanation
snmp-server view <view-string> Configure view on the switch. This

Digitalchina Networks DCS-3950 series Specifications

General

Brand	Digitalchina Networks
Model	DCS-3950 series
Category	Network Router
Language	English