27
Getting Started
DIGNOケータイ3
USIM PIN
USIM PIN and USIM Card Lock
When USIM card lock is enabled, PIN (a code for USIM Card)
is required for handset use each time handset is powered on;
helps prevent unauthorized use by others.
・Enable USIM card lock by enabling PIN.
・PIN is 9999 by default.
PIN Entry Cautions
PIN entry is required when changing PIN, when powering
handset on with USIM card lock enabled, etc.
・Entering incorrect PIN 3 consecutive times activates
PIN Lock. To cancel, Personal Unblocking Key (PUK)
is required; For details about PUK, contact Customer
Service.
・Entering incorrect PUK 10 consecutive times activates
PUK Lock, disabling handset. For recovery, USIM Card
must be reissued at a SoftBank Shop (fees apply).
Enabling USIM PIN
When PIN (a code for USIM Card) is enabled, PIN entry is
required for handset use each time handset is powered on
with USIM Card installed.
Settings Lock/Security SIM card lock
Screen for entering PIN appears.
Lock SIM card Enter PIN (OK) ( )
PIN is enabled and USIM Card is locked.
Disabling USIM Card Lock
In screen for entering PIN, Lock SIM card Enter
PIN (OK) ( )
Operation at Power On
When USIM card lock is enabled, PIN entry window appears
each time handset is powered on. To use handset:
Enter PIN (Accept)
Handset is usable.
To Next Page
Loading...
