ASE 150 Operator’s Manual
64 Doc. 065207-02 9/08
Error 018 Oven heater AC line voltage too high.
Cause:
Incorrect settings of the oven voltage switches on the ASE 150 rear
panel.
Action:
Set both oven voltage switches to match the voltage from the power
source at the installation site: either
110 (for voltages between 100
and 120 Vac) or
220 (for voltages between 220 and 240 Vac). For
details, see Section B.2.3
.
Action:
If selecting the correct switch settings does not correct the problem,
contact Dionex for assistance.
Error 020 Oven heater malfunction.
Cause:
Incorrect settings of the oven voltage switches on the ASE 150 rear
panel.
Action:
Set both oven voltage switches to match the voltage from the power
source at the installation site: either
110 (for voltages between 100
and 120 Vac) or
220 (for voltages between 220 and 240 Vac). For
details, see Section B.2.3
.
Action:
If selecting the correct switch settings does not correct the problem,
contact Dionex for assistance.
Error 021 Top plate heater AC line voltage too high.
Cause:
Incorrect settings of the oven voltage switches on the ASE 150 rear
panel.
Action:
Set both oven voltage switches to match the voltage from the power
source at the installation site: either
110 (for voltages between 100
and 120 Vac) or
220 (for voltages between 220 and 240 Vac). For
details, see Section B.2.3
.
Action:
If selecting the correct switch settings does not correct the problem,
contact Dionex for assistance.
To Next Page
Loading...