5.3 ACCESSORIES
The following accessory items are available for the model 1601 and 1602 barrier gate operators.
Loop Detector Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9406-010 - Single channel detector.
P/N 9405-010 - Two channel detector.
Loop Wire Loop wire with XLPE insulation is available in 500 and 1000 foot rolls.
Available in Black, Blue and Red insulation.
Loop Sealant Asphalt (P/N 2600-771) and concrete (P/N 2600-772) sealant.
Meg Ohm Meter Checks the integrity of ground loops. P/N 9401-045
Reverse Edge Reverse edge installs on the bottom of the wood arm. P/N 8080-016
Photo Cell Photo cell prevents arm from lowering on vehicles or pedestrians.
P/N 8080-018
Time Clock 7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator. P/N
2600-791 - 7 day clock P/N 2600-795 - 365-day clock.
Surge Devices High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage. P/N 1878-010 - Low Voltage.
Batteries Replacement batteries for battery back-up system. P/N 1801-009
Speed Bumps Prefabricated 6-foot speed bump reduces traffic speed through gate
system. P/N 1610-150
Heater Kit Thermostatically controlled heater for cold weather areas. P/N 1601-092
Fan Kit Thermostatically controlled fan for hot humid environments.
P/N 1601-093
Gate Tracker™ Optional control board allows the barrier gate operator to report activity
to a companion 1815, 1817 or 1818 access control system.
Wood Arm 14-foot replacement wood arm. P/N 1601-048
Plastic Arm 12-foot plastic replacement arm. P/N 1601-071
46
To Next Page
Loading...
