Dnepr MT10-36 - Page 2

Due to continuous development of the produ ct aimed
at the improvement of its reliability and operating con -
diti ons there may_ be some n eglig ible dis crepan cies bet-
we en the product design and it s d es cri ption in this pub -
l icat i on .
•
To the Customer 's Notice
Check the comp let eness of the motorcycle set. Each
motorcycle is sold complete with:
I. Certificate.
2. Operating Ins tructions.
3. Brief
In structions on the Use of Storage Batteries.
4. Tool Kit.
5.
Spare Pads Kit ._ .
Due to the constant· .. 9evelopm~nt of the motorcycle
design some minor modifications not indicated in this
manua l can be expected in the purchased machine.
Before
star ting motorcycle oper ation do not fail to
fill the air cleaner bath with 150 cm3 of oil.
To
avoid burning thro ugh of the silencer in c ase of
the engine operation on too rich mixture and with late
ignition advance angle, care should be taken to c orrectly
adjust the carburattor and to set the ignition advance
angle (see "A djus ting the Carburettor" and "Ignition Ti-
ming").
. ·· ·