dolycon CT100 Series - Page 16

CT100 series inverters Product overview
12
setting
multi-step speed setting, PID setting, 485
communication setting
Auto voltage
adjustment
Keep a stable voltage automatically when the
grid voltage transients
Speed tracking
Start the rotating motor smoothly
Control
terminals
Digital input
Standard 8-channel inputs, one of which can
be high-speed pulse input (HDI)
Analog input
Standard 2-channel inputs, AI1: 0 ～ 10V or
4 ～ 20mA input optional, AI2: -10V ～ +10V
input.
Digital output
Standard 2-channel multi-function collector
outputs, one of which can be high-speed
pulse output (HDO).
Analog output
Standard 2-channel outputs AO1, AO2 (0 ～
10V or 4～20mA optional)
Relay output
Standard 2-channel relay outputs
Communicat
ion interface
RS485
communication
RS485 communication interface for external
RS485 communication,
Modbus protocol (RTU mode)
Fault
protection
ACC overcurrent, DEC overcurrent, constant speed overcurrent,
ACC overvoltage, DEC overvoltage, constant speed overvoltage,
bus under voltage, motor overload, inverter overload, input power
failure, output phase loss, rectifier module overheating, inverter
module overheating, external fault, communication fault, current
detection fault, etc.
Keypad
display
LED display
Highlight LED digital tube displays the
inverter information
Others
Running
environment
Indoors, less than 1km above sea level,
without dust, corrosive gases or direct
sunlight
Ambient
temperature
-10 ～ +40℃, derate 1% for every additional
1℃ when the ambient temperature is
between 40～50℃
Humidity
5～95% (no condensation)
Altitude
0 ～ 2000m, derate 1% for every additional
100m when the sea level is above 1000m
Vibration
Less than 0.5g
Storage
temperature
−40～+70℃