dolycon CT100 Series - Communication (F12 Group)

CT100 inverter Detailed instructions of function parameters
136
F11.27
Running time of
step 5
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.28
Running time of
step 6
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.29
Running time of
step 7
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.30
Running time of
step 8
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.31
Running time of
step 9
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.32
Running time of
step 10
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.33
Running time of
step 11
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.34
Running time of
step 12
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.35
Running time of
step 13
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.36
Running time of
step 14
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
F11.37
Running time of
step 15
Setting range: 0.0～
6553.5s(h)
Default value:
0.0s(h)
6.13 485 communication (F12 group)
CT100 inverter supports the international Modbus protocol and RTU format.
F12.00
Local address
Setting range: 1～247
Default
value: 1
Set the local communication address: 0 for the broadcast address, 1～247 for
slave address.