CT100 inverter Safety precautions
1
1 Safety precautions
Please read this manual carefully and follow all safety precautions before
installing, debugging, maintaining and repairing the inverter.
If any physical injury or death or damage to the devices occurs for ignoring to the
safety precautions in the manual, our company will not be responsible for any
damages and we are not legally bound in any manner.
Following the warning symbols are used in this manual:
Serious physical injury or even death may occur if not follow the relative
requirements.
Physical injury or damage to the devices may occur if not follow the
relative requirements.
1.1 Safety guidelines
1.1.1 Before installation
» Do not operate the inverter if there are any signs of water in the inverter when
unpacking.
» Do not operate the inverter if there is any damage or components loss to the
inverter when unpacking. Otherwise, physical injury or damage to the devices
may occur.
» Do not touch the control terminals, PCB board or components inside the
inverter with hands or body.
» Do not operate the inverter if the packing list is not consistent with the devices.
» Do not operate the inverter if the information on the type designation label is
not consistent with your order.
To Next Page
Loading...
