INTRODUCTION
1-6 EPT023558 Issue 1 February 2016
Machine modules
Printer
The printer is a Thermal Transfer type that can print onto virtually any type
of label material.
The Thermal Transfer printer uses a very thin transfer ribbon positioned
between the print head and the label, and the ink on the ribbon surface is
burned onto the label. The prints are light resistant.
Available printers:
• Thermal Transfer printer (width): T50i (4")
• Resolution: 12 dots/mm (300 dpi)
Printer design
The printers are designed so the label and ribbon rollers, together with the
print head, are accessible from the Operator side. The opposite side, the
Service side, holds the driving belts, cables and an electronic circuit board
which are concealed under a cover plate.
Note: Printers are available in mirrored versions: Left and Right. The front
of the printer is defined as the area in which the print head is
mounted.
Left hand version Right hand version
To Next Page
Loading...
