INSTALLATION
4-4 EPT023558 Issue 1 February 2016
MOUNTING THE MACHINE
WARNING: It is recommended that two persons lift the Blow
applicator by the mounting rail to avoid damages to the
equipment.
The M230i-B100 applicators are designed to be mounted in many posi-
tions.
Please contact Domino if you have any questions on how to install the
units.
(1) Remove the packaging material from the Blow applicator.
(2) Align the Blow applicator with the conveyor (90°).
Note: Consider the work height for exchange of label rolls and ribbons.
CAUTIONS: (1) If mounted to a stand it is important that the
machine is securely fastened to the stand.
(2) If possible, fasten a floor stand to the floor or
conveyor system to ensure that the equipment will
be unaffected by extreme vibration and risk of tilting.
(3) Install protective guards (option) and machine stop (option) according
to instructions provided with the items.
(4) Install remaining options.
(5) Perform functional checks of the safety equipment.
To Next Page
Loading...
