INSTALLATION
4-6 EPT023558 Issue 1 February 2016
Printer cable
The printer cable is pre-connected to the printer in one end; the other end
must be connected to the PCU. Mount the printer cable through the printer
cable inlet in the rear of the PCU. Connect the printer cable to the PCU.
Secure the mounting plate to the unit.
Applicator cable
The applicator cable is pre-connected to the applicator in one end; the
other end must be connected to the PCU. Mount the applicator cable
through the application cable inlet in the rear of the PCU. Connect the
applicator cable to the ACC in the PCU. Secure the mounting plate to the
unit.
(1) Printer cable - Power
connector
(2) Printer cable - Data
connector
PCU Printer cable installed
1
2
To Next Page
Loading...
