SAFETY PRECAUTION
EPT023558 Issue 1 February 2016 2-3
SAFETY PRECAUTION
To ensure maximum safety, always read this section carefully before doing
any work on the equipment or making any adjustments.
Information - Warning, Caution & Notes
WARNINGS, CAUTIONS and Notes used throughout this manual are
highlighted by use of international hazard symbols. The following definitions
of all three special notices are shown below in the way that they are
presented in the manual.
WARNING: A WARNING is given to alert the reader to possible
hazards which may cause loss of life, physical injury or
ill health in any form.
WARNINGS fall into two categories, those due to hazardous materials and
those due to hazardous operations. Where appropriate, a second
international hazard symbol is used for specific hazards.
CAUTION: A CAUTION is given to alert the reader to possible hazards
which may cause damage to equipment.
Note: A Note is used to convey, or draw attention to, information that is
related to the immediate subject of the text.
Warning signs
Following signs can be found on the machine.
The following safety instructions concern all work carried out on the
machine as well as in the area close to the machine. Local restrictions
concerning the specific factory should to be taken into consideration.
Risk of crushing Sharp edges Laser (option)
To Next Page
Loading...
