INSTALLATION
EPT023558 Issue 1 February 2016 4-11
External output - Terminal block CN4
The default settings for output RE1-RE7 are configured as below, but can
be amended in the setup program.
Note: All outputs are configurable but RE1-RE7 are configured as
standard as above.
Pin Output Function Comments
29 Reference Voltage 1 See further down for more
information
30 RE1 Printer ready
31 RE2 Data ready
32 RE3 Applicator in home
position
33 RE4 Cycle completed
34 RE5 Summary warning
35 RE6 Applicator error
36 RE7 Printer error
37 RE8 User defined The configuration of user
defined outputs is done setup
program or on the PCU front
panel. Normally a configuration
is already made at delivery.
38 RE9 User defined
39 RE10 User defined
40 Reference Voltage 2 See further down for more
information
To Next Page
Loading...
