SAFETY PRECAUTION
EPT023558 Issue 1 February 2016 2-7
Protective guards
The Blow applicators can be installed behind protective guards. The Blow
Applicator can be mounted at different angles and positions. Domino offers
separately a solution for protective guards that fits most situations. If this
offered solution is not applicable, because of special site situations,
customized solutions for protective guards can be incorporated to the final
installation.
These guards can be both fixed and movable. Movable guards are
necessary if the guards have to be removed/opened when labels and/or
ribbon are changed.
Movable guards must be equipped with interlocking devices that prevent
the machine from operating when the guards are removed or doors
opened.
The design of guards must consider so the printer and PCU is easily
accessible for operation and service.
Examples of M230i-B100 installation
To Next Page
Loading...
