Domino M Series - Part 4: Installation

INSTALLATION
EPT023558 Issue 1 February 2016 4-1
PART 4: INSTALLATION
CONTENTS
Page
SITE REQUIREMENTS ......................................................................... 4-3
PRE-INSTALLATION ............................................................................. 4-3
INSTALLATION ..................................................................................... 4-3
MOUNTING THE MACHINE ................................................................. 4-4
COMPRESSED AIR CONNECTION ...................................................... 4-5
ELECTRICAL AND COMMUNICATION CONNECTIONS ..................... 4-5
Printer cable ..................................................................................... 4-6
Applicator cable ............................................................................... 4-6
Beacon cable (optional) ................................................................... 4-7
ACC terminal blocks for external connections ................................. 4-8
Supply voltage - Terminal blocks CN5 & CN6 ............................ 4-9
External inputs - Terminal blocks CN3 ........................................ 4-9
Connect sensors to ACC inputs .................................................. 4-9
Connect a relay or optocoupler to ACC inputs ........................... 4-10
External output - Terminal block CN4 ......................................... 4-11
Connect an external load to the relay outputs (example) ........... 4-12
JP2 - Reference voltage jumper .................................................. 4-12
OPTIONAL WLAN COMMUNICATION ................................................. 4-13