TECHNICAL DATA
EPT023558 Issue 1 February 2016 3-7
Firmware
Required ACC firmware
7.00R2 or later
3.70 or later
Configuration
Required M-setup version
4.85.2 or later
Graphic backlit display 128 x 64 pixels
4 x 18 characters in
text mode
Keys, Setup and control. 7
LEDs
status and communication
Two Red
Four Yellow
Four Green
Inputs
PNP (fixed)
PNP/NPN switchable (Scanner Good Read)
30
1
Input range
Nominal voltage
Operating range
Nominal input current
Variations depending of the input voltage
(Inputs are referring to ACC/controller 0VDC)
24VDC
9-36VDC
2mA
1-3mA
Outputs (CPU)
NPN (fixed)
Relay (max load 250VAC, 2A)
21
10
CPU
For applicator controller/ACC
1 x 88MHz
Blow applicators M230i-B100
To Next Page
Loading...
