Dräger Infinity Delta Series - Page 106

Supplement for Infinity Delta Series Software
106 Supplement – Infinity
®
Delta Series Software VF10.1
NMT via Trident Pod
Stimulation current Auto mode: read-only; displayed value is based on reference
measurement at startup (max. 60 mA)
Manual mode: 5 mA (default) to 60 mA, in increments of 5 mA
Pulse width 100, 200 (default), or 300 μs
Output polarity Monophasic
Measurement range NMT-Temp: 20 to 40 °C
Single: 0 to 200 % (of reference twitch)
TOF-Ratio: 4 to 150 %
TOF-Count: 0 to 4 (number of twitches displayed if TOF-Ratio <4 %
or number of twitches <4)
PTC: 0 to 20 (number of twitches)
Measurement interval None, 1s, 10s, 20s (default), 1min, 5min, 15min, 30min
Impedance range 1.2 Ω to 6000 Ω
(1)
Accuracy NMT-Temp:±1 °C
Single: ±10 %
TOF-Ratio:±10 %
Display resolution NMT-Temp:1 °C
Single/TOF-Ratio:1%
TOF-Count/PTC:1
Trend scale range NMT-Temp: 20 to 40° C (incr. of 1 °C)
Single: 0 to 200 % (incr. of 5 %)
TOF-Ratio: 0 to 150 % (incr. of 5 %)
TOF-Count: 0 to 4 (incr. of 1)
PTC: 0 to 20 (incr. of 1)
Maximum output
charge per pulse
frequency
18 μC (stimulation current of 60 mA, pulse width of 300 μs)
Maximum average
current across a
500 Ω resistor
18 μA (stimulation current of 60 mA, pulse width of 300 μs)