Dräger Infinity Delta Series User Manual

Supplement for Infinity Delta Series Software
6 Supplement – Infinity
®
Delta Series Software VF10.1
Introduction
Changes in Delta VF10.1
Starting with Delta VF10.1, the following VGA Display requirement has been removed from the Display
Unit (Kappa only) table under the Displays heading.
Output resolution:
High resolution mode: 1024 x 768
Medium resolution mode: 800 x 600
Low resolution mode: 640 x 480
System Components
Applicable Software Options (on a memory option card) include:
 Options for Delta only:
– Delta second PodPort option – Pod Comm
 Delta, Delta XL and Kappa:
– 4 to 5 channel option – Delta 4-5 Channels
– 6 to 8 channel option – Delta 6-8 Channels
– 3-Lead ST-segment analysis option –
ST Monitoring
– ARIES option – Aries S/W
– Hemodynamic Calculations option – Hemodynamic Calculations
– ACE full arrhythmia option – Arrhythmia II
– Hemo/Oxy/Vent Calculations option package – Hemo/Oxy/Vent Calculations
– OR mode option (loaded in the monitor)
– OR Single Unit
– OR Mode option (loaded in the IDS or Kappa Advanced Communication Option II) – OR Site

Dräger Infinity Delta Series Specifications

General

Touchscreen	Yes
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Connectivity	Ethernet, USB
Display Type	TFT LCD
Battery Type	Lithium-ion
Power Supply	100-240 V AC, 50/60 Hz
Alarms	Visual and audible alarms for all parameters
Data Storage	Internal memory
Compatibility	Dräger