Supplement for Infinity Delta Series Software
72 Supplement – Infinity
®
Delta Series Software VF10.1
The monitor displays a ventilator pressure waveform next to the Airway Pressure (Paw) parameter box
and a ventilator flow waveform next to the Flow/Volume (Vent) parameter box.
For MEDIBUS.X devices, the monitor can also display the CO
2 waveform next to the End-Tidal CO2
(etCO2*) parameter box.
Supported Ventilator Parameters
When the inO2 parameter is received from a connected ventilator, the inO2 parameter is trended as FiO2*
on the Delta Series monitor.
The following table lists the parameters for all ventilators.
NOTE
For information on calculating parameter values, see the documentation for the peripheral device you
are using.
CAUTION
The parameter abbreviations on the bedside monitor may differ from those displayed on the ventilator
(refer to the "Ventilation Parameters" table).
The bedside monitor displays pressure units in cmH2O while the ventilator displays pressure units in
mbar (1 cmH2O being equal to 1 mbar approximately).
To Next Page
Loading...
