Dräger Infinity Delta Series - Page 73

Supplement – Infinity
®
Delta Series Software VF10.1 73
Supplement for Infinity Delta Series Software
Ventilation Parameters
Parameter Bedside
monitor
label
Bedside and
Infinity
network
units of
measure
Where locally displayed Former
label
Peak inspiratory
pressure
PIP cmH2O • Paw (Flow and
Volume) parameter box
• Show All Parameters screen
• Ventilation split screen
Mean airway
pressure
Pmean cmH2O MAP
Positive end-
expiratory pressure
PEEP cmH2O
Respiratory rate RR /min • Vent (Flow and
Volume) parameter box
• Show All Parameters screen
• Ventilation split screen
RRv
Expiratory minute
volume
MVe
1
L/min • Vent (Flow and
Volume) parameter box
• Ventilation split screen
Expiratory tidal
volume
VTe
2
ml TVe
End-tidal CO2
concentration
etCO2* mmHg,
kPa,%
• etCO2* parameter box
• Show All Parameters screen
Inspiratory oxygen
fraction
inO2
NOTE: may
show as FiO
2
on the
network or
source device
% • MultiGas parameter box
(when MultiGas is enabled)
• O2/N2O parameter box (when
MultiGas is disabled)
• Show All Parameters screen
• Ventilation split screen
NOTE: in the Show All
Parameters screen, inO2
displays as FiO2*
iO2
Plateau pressure Pplat cmH2O • Show All Parameters screen
• Ventilation split screen
Pause
Ratio of Inspiratory
time to Expiratory
time
I:E