Dräger Isolette 8000 plus - Reprocessing; Disassembly

Instructions for use Isolette 8000 plus SW 5.n 129
Reprocessing
12 Reprocessing
12.1 Disassembly
12.1.1 Observe before disassembly
NOTICE
Risk of damage to the device
For routine cleaning, there is no need to separate the hood and shell assemblies
from the trolley.
► If separation is necessary, contact DrägerService.
CAUTION
Risk of injury or damage to the device
Accessories and optional components could fall off the device.
► Before disassembling the hood and shell assemblies, remove accessories and
optional components mounted to device.
The most effective way to clean the device is to first disassemble the device. Then
group the parts and assemblies in categories according to the method of cleaning
required.
1 Switch off the device and all devices connected to it.
2 Disconnect the mains plugs.