Dräger Julian - CMV Default Settings; PCV Default Settings

CMV Default Ventilation Settings
● Select and confirm the line »CMV default settings«
with dial knob.
The menu keys for CMV are displayed:
Display (example):
To modify settings:
● Press the respective menu key.
● Set and confirm with dial knob.
To return to »CMV default settings«:
● Press dial knob.
PCV Default Ventilation Settings
● Select and confirm the line »PCV default settings«
with dial knob.
The menu keys for PCV are displayed:
Display (example):
To modify settings*:
● Press the respective menu key.
● Set and confirm with dial knob.
To return to the »PCV default settings« menu:
● Press dial knob.
_____________
* Maximum default setting for Pmax: 30 cmH2O.
Configuring in Standby Mode
Setting Default Values
Operating Instructions Julian SW 3.n
100
Standby / Configuration
Adjust default settings or confirm
600 12 10 025
PEEP
cmH O2
Freq.
bpm
VT
mL
T:TIP I
%
P max
cmH O2
calibration
O -sensor 2
21 vol.%
more
✓
defaults
alarm sound
scale
parameter
record
interface
alarm limits
curves
basic configurations
CMV default settings
PCV default settings
Fresh Gas Flow Control
0 1 2 3 4 6 7 8 9 5
1 2 3 5 6 7 8 9 4
gas
sensor
pls. tone
adult child
✓
1:2.0
T
I
:T
E
MAC-config.
MAC display
on off
MAC correction
on off
age 36
Standby / Configuration
calibration
O -sensor 2
21 vol.%
more
✓
Adjust default settings or confirm ! Select default carrier gas using hard key.
defaults
alarm sound
scale
parameter
record
interface
alarm limits
curves
basic configurations
CMV default settings
PCV default settings
Fresh Gas Flow Control
0 1 2 3 4 6 7 8 9 5
1 2 3 5 6 7 8 9 4
gas
sensor
pls. tone
adult child
✓
2.00100
O%2
L/min
Fresh Gas O
2
MAC-config.
MAC display
on off
MAC correction
on off
age 36