Dräger Julian - Airway Temperature Monitoring (Available Option)

Airway Temperature Monitoring
(Available Option)
Required parts
– Temperature sensor 84 05 371,
– Y-piece with temperature sensor receptacle M 30 543
– T-piece 86 00 224
– Filter 86 00 225
1 Connect Y-piece with temperature sensor receptacle
to breathing circuit.
2 Plug T-piece into the Y-piece.
3 Plug filter with luer-lock adapter for gas sampling line
into the T-piece.
4 Connect temperature sensor to the Y-piece.
5 Connect temperature sensor into the temperature
socket on the interface panel in the back of the anes-
thesia workstation.
Airway temperature is now displayed on the data
screen
Monitoring
Airway Temperature Monitoring
Operating Instructions Julian SW 3.n
90
4
3
2
1
5
Temp.