Need help?Do you have a question about the Dräger Julian and is the answer not in the manual?
General| Category | Anesthesia Workstation |
|---|---|
| Gas Supply | O2, N2O, Air |
| PEEP | 0 to 20 cmH2O |
| Type | Anesthesia Machine |
| Ventilation Modes | SIMV |
| Tidal Volume Range | 20 to 1400 mL |
| Vaporizers | Sevoflurane, Isoflurane |
| Monitoring | O2, CO2, N2O, anesthetic agent, pressure, volume, flow |
| Tidal Volume | 20 to 1400 mL |
| Respiratory Rate | 4 to 60 breaths per minute |
| FiO2 Range | 21-100% |
| Weight | Approximately 120 kg |
Guides on how to adjust ventilation settings like PEEP using the system controls.
Instructions for charging the internal UPS battery before initial use of the workstation.
Steps for connecting central gas supply hoses to the workstation's gas block.
Procedure for installing and connecting O2 and N2O cylinders as a backup supply.
Steps for connecting the workstation to the mains power socket and equipotential bonding.
Guided procedure to verify all components are correctly connected and functional before operation.
Outlines the automatic system self-test process and its components.
How to adjust carrier gas, O2 concentration, and fresh gas flow settings via the interface.
Guide to choosing and configuring ventilation modes like MAN/SPONT, IPPV, and PCV.
Guidance on setting, displaying, and managing alarms, including AutoSet and CO2 alarms.
Steps for configuring operational settings, monitoring parameters, and performing system calibrations.
To Next Page
