Dräger Julian - Dismantling Emergency Ventilation Bag; Removing Waste Gas Connector

Removing waste gas connector
1 Pull hose off connector.
2 Remove waste gas connector completely.
Dismantling emergency ventilation bag
Example: Dräger Resutator 2000
● Disconnect the mask or ventilation tube from the
patient valve.
● Pull the patient valve out of the bag.
● Compress the retaining ring on the bag completely
and remove it.
● Pull the adapter out of the bag.
● Unscrew the bottom part of the valve and remove the
diaphragm.
The small diaphragm must remain in the upper
part of the valve
● Prepare the individual parts for disinfection and
cleaning in a washing machine.
1
2
101
Care
Dismantling components
"Only for internal use by Draeger. Not applicable as Instructions for Use!"