Dräger Julian - IPPV Default Settings; PCV Default Settings

Configuring in Standby Mode
Setting default values
90
IPPV default settings
● Select and confirm the line »IPPV default settings«
with the rotary knob.
The softkeys for IPPV are displayed:
Display (example):
To modify the settings:
● Press the relevant softkey.
● Set and confirm with the rotary knob.
To return to the »default settings«:
● Press the rotary knob.
PCV default settings
● Select and confirm the line »PCV default settings«
with the rotary knob.
The softkeys for PCV are displayed:
Display (example):
To modify the settings*:
● Press the relevant softkey.
● Set and confirm with the rotary knob.
To return to the »default settings« menu:
● Press the rotary knob.
_____________
* Maximum setting for Pmax: 30 mbar.
Standby / Configuration
0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
adult child
default settings
pulse tone
alarm sound
scale
parameters
record
interfaces
alarm limits
curves
basic configurations
IPPV default settings
PCV default settings
fresh gas delivery
Modify default settings or confirm .
600 12
1:2
10 025
PEEP
mbar
Freq.
1/min
V
T
mL
T
I
:T
E
T
IP
:T
I
%
Pmax
mbar
anesth. agent
calibration
O
2
-sensor
21 vol.%
gas sensor
more
✓
✓
selection
auto man
The anesthetic
agent is automati-
cally selected by
gas identification
Isoflurane
Standby / Configuration
anesth. agent
calibration
0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
adult child
default settings
pulse tone
alarm sound
scale
parameters
record
interfaces
alarm limits
curves
basic configurations
IPPV default settings
PCV default settings
fresh gas delivery
Modify default settings or confirm .
12
1:2
10 015
PEEP
mbar
freq.
1/min
T
I
:T
E
Insp. flow
L/min
Pmax
mbar
O
2
-sensor
21 vol.%
gas sensor
more
✓
✓
selection
auto man
The anesthetic
agent is automati-
cally selected by
gas identification
Isoflurane
"Only for internal use by Draeger. Not applicable as Instructions for Use!"