Dräger Julian - Page 89

Setting the date/time:
● Select and confirm the »time« line with the rotary
knob.
The cursor bar marks the hours.
● Press the rotary knob to confirm and the value is
highlighted against a white background. It can now be
adjusted and confirmed with the rotary knob.
The minutes are adjusted and confirmed in the same
way.
● Set and confirm the date as described above.
Setting the language of the display texts:
The last language selected is highlighted by a grey
background.
The following alternatives can be selected:
English (GB) Swedish (SW)
French (F) Norwegian (N)
German (D) Portuguese (P)
Dutch (NL) Polish (PL)
Italian (I) English (USA)
Spanish (E) Japanese (Kanji) (JP)
Danish (DK)
To change the language setting:
● Turn the rotary knob to select the line »language« and
press to confirm.
● Select and confirm the relevant country code with the
rotary knob. The texts in the menu now appear in the
language selected.
Setting the tone sequence:
● Turn the rotary knob to select the line
»tone sequence« and press to confirm.
● Select and confirm either the Dräger alarm tone
sequence or the standard European alarm tone
sequence.
89
Configuring in Standby Mode
Setting default values
"Only for internal use by Draeger. Not applicable as Instructions for Use!"