Dräger Julian - Patient and System Management

Setting the Vapor unit
1 Lock the unused Vapor unit
= push lever fully in the direction of the unused Vapor
(example: left-hand Vapor locked).
2 Press the O button and
3 set the handwheel to the required anaesthetic agent
concentration.
Aspirating secretion
● Swing the bottles forwards.
1 Set the switch to I.
2 Seal the "fingertip" or kink the suction hose and
3 Set the appropriate suction pressure for the patient
with the rotary knob »Vac.« and
4 check on the pressure gauge.
Observe the hygiene regulations of the hospital!
After aspirating
● Rinse the suction hose with the water purifier.
1 Set the switch to 0.
Julian
D
2
4
1
3
46
Operation
Setting the Vapor unit
Aspirating secretion
2
1
3
"Only for internal use by Draeger. Not applicable as Instructions for Use!"