Applying the Durasensor DS-100 A
Reusable sensor for short-term monitoring of relatively
immobile patients weighing over 40 kg.
The sensor is preferably positioned on the index
finger, although other fingers can also be used. The
little finger should be used if the patient is particularly
large or obese.
● Open the clip slightly and slide the sensor onto the
finger. The tip of the finger must touch the end and
the soft padding should rest on the nail and tip of the
finger. The lead should be on top of the finger.
● Ensure that the finger is not squeezed or hurt by the
clip.
● Change the application site at least every 4 hours in
order to avoid impairing blood circulation.
Follow specific Instructions for Use when using other
Nellcor sensors!
Monitoring
SpO2 Measurement
Operating Instructions Julian SW 3.n
89
To Next Page
Loading...
