Dranetz Xplorer User Manual

45
Download Data via USB Connection
1) Plug the small end of the USB active sync cable into the small USB
connector on the right side of the HDPQ instrument. Plug the other
end into the USB connector on your computer.
2) The HDPQ instrument will plug & play, and the Windows
®
Mobile
window will open automatically.
3) In your device, look under File Management, and click on Browse
Contents.
4) Navigate to the folder directory: Computer\HDPQ\Flash\User
You should see the following folders:
screens – contain all screen snapshots not associated with a mini report
reports – contain the Mini Reports
setups – contain the Setup files
archive – contains the ddbx data folders
5) Click on any folder to see the available files to download. Proceed to
select and right-click on a file and select Copy.
6) Using Windows
®
Explorer, navigate to the folder where you would
like to upload the data. Right click and select paste to transfer the
data to your computer.

Dranetz Xplorer Specifications

General

Brand	Dranetz
Model	Xplorer
Category	Monitor
Language	English