Ducati MULTISTRADA 950 - Page 109

When accessing this function, “PIN:" indication will
be displayed followed by four flashing dashes "- - -
" (A).
To go back to the previous indication without
activating any PIN CODE, keep  (2) pressed for
2 seconds.
While if you press  (4), with the 4 flashing
dashes “- - - -”, the instrument panel  PIN
CODE entering procedure.
Entering the code (B):
1) Press  (4), one digit  flashing
indicating "0";
2) Each time you press the  (1) the displayed
number increases by one (+ 1) up to "9" and then
 back from "0";
3) Each time you press the  (2) the displayed
number decreases by one (- 1) up to "1" and then
 back from "0";
4) Press  (4) to confirm the number and
move on to the following digit.
Repeat the procedures until you confirm all the 4
digits of the PIN CODE.
A
B
C
1
24
Fig 61
108