- if vehicle speed is > 5 Km/h (3 mph) and
control is "closed” and brakes are released, the
instrument panel will confirm the selected riding
mode, the name of Riding Mode flashes for 3
seconds and instrument panel goes back to
“standard page” displaying.
- if vehicle speed > 5 Km/h (3 mph) and
control is "open", the instrument panel will
display the warning “CLOSE GAS” in rolling
mode within the Menu. Only when
control is "closed" does the instrument panel
confirm the selected riding mode and go back to
standard page displaying.
- if vehicle speed is > 5 Km/h (3 mph) and
control is "closed” but brakes are in use, the
instrument panel will display the warning
“DON’T BRK” in rolling mode within the Menu.
Only when brakes are released does the
instrument panel confirm the selected riding
mode and go back to standard page displaying.
- if vehicle speed is > 5 Km/h (3 mph) and
control is "open” and brakes are in use, the
instrument panel will display the warning
“CLOSE GAS DON’T BRK” in rolling mode within
the Menu. Only when control is "closed"
and brakes are released does the instrument
panel confirm the selected riding mode and go
back to standard page displaying.
If the above-described conditions for “validating”
the change of Riding Mode are note true within 5
seconds from when “CLOSE GAS” and/or “DON’T
BRK” warning is triggered, the selection procedure
will be and the instrument panel will go back
to displaying the page active before Riding Mode
selection and no will be changed.
57
To Next Page
Loading...
