Use (1) and (2) to select the device you wish
to pair and press the ENTER (3).
The instrument panel shows "Pairing": to confirm the
selected device Pairing press the ENTER (3)
again.
If you do not wish to proceed with pairing, highlight
the "Back" indication and press the ENTER
(3).
By confirming the device pairing, the instrument
panel will display “Wait...”.
As soon as the procedure is completed, the device is
added to the list of associated devices.
If Pairing is not successful, the "Pairing error"
message will be displayed.
If you wish to connect a Bluetooth navigator, the
connection procedure shall be completed on the
navigator, by selecting the connection with the
motorcycle Bluetooth control unit. If user does not
complete the pairing procedure on the Navigator
side within 90 seconds, pairing procedure cannot be
completed.
22
To Next Page
Loading...
