1-27
Chapter 1 Before Operation
2/7 page
[1]
[2]
[3]
[4]
[5] [6]
[1a] [1b]
No. Item Details
[1] Ejection roller Specify whether to move the stitch ejection rollers R and L. When set
to on, the ejection roller stops.
[1a] Stitch ejection roller L
[1b] Stitch ejection roller R (*1)
Default: o
[2] Folding conveyance belt Specify whether to use the folding conveyance belt. When set to on,
the conveyance belt keeps moving and presses a booklet against
the stopper. Set this to on to stabilize the folding position when
”stitching with no fold" has been selected.
Default: o
[3] Fold start timing(*2) Adjusts the start timing for folding operations.
+: The value increases and folding starts with slower timing.
-: The value decreases and folding starts with faster timing.
Setting range: 0 to 10, default: 1
[4] Page number Displays the current page number.
[5] Previous page key Returns to the previous page.
[6] Next page key Goes to the next page.
(*1) During page insertion operations, the stitch ejection roller R stops regardless of this setting.
(*2) The larger the value, the slower the processing speed.
To Next Page
Loading...
Need help?
General
