Why is the stitch not at right angles to paper on my Duplo Folding Machines?
If the stitch is not at right angles to the paper on your Duplo Folding Machines, it's likely that the angle of the saddle-stitching stopper is not appropriately adjusted. Adjust the angle of the saddle-stitching stopper.
Why are stitches deformed on my Duplo DBM-600T?
If the stitches are deformed on your Duplo Folding Machines, the stitcher head is not appropriately adjusted. Adjust each section of the stitcher head.
Why does Duplo DBM-600T Folding Machines paper not reach the folding stopper and paper jams?
If paper does not reach the folding stopper and jams on your Duplo Folding Machines, the space under the fold paper holder may be too narrow for the paper thickness. Widen the space.
Why is the surface of a booklet stripped at the press roller of Duplo Folding Machines?
If the surface of a booklet is stripped at the press roller of your Duplo Folding Machines, the fold ejection roller gap is too narrow. Increase the gap.
Why is my Duplo DBM-600T Folding Machines booklet not conveyed after being trimmed?
If your Duplo Folding Machines booklet is not conveyed after being trimmed, the conveyance restart timing is not appropriate. Make the timing slower.
Why is the booklet not in contact with the stopper on my Duplo DBM-600T Folding Machines?
If the booklet is not in contact with the stopper because it either doesn't reach it or bounces off on your Duplo Folding Machines, the conveyance stop timing is not appropriate. Make the conveyance stop timing slower on the control panel of the DBM-600 or the PC CONTROLLER. If the problem persists, narrow the roller gap.
General| Brand | Duplo |
|---|---|
| Model | DBM-600T |
| Category | Folding Machines |
| Language | English |
Explains the layout, buttons, and screen elements of the DBM-600 control panel.
Details the control panel layout, buttons, and screen elements for the DBM-600T.
Guides users through making essential settings like paper size and binding method.
Explains how to adjust individual machine sections using the step mode for precision.
Outlines procedures for wire removal, threading, and lubrication of the stitcher head.
Lists and explains error codes and their corresponding solutions for the DBM-600.
Provides guidance on identifying and clearing paper jams in various machine sections.
Lists and explains error codes and their corresponding solutions for the DBM-600T.
To Next Page
