51
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
Short conveyor locking pins
Conveyor locking pins
Always use pins to lock up conveyor during hauling.
Bottom control panel
(S.N. 0035 and up)
Rotor status
lights
Job hours
Electronic Governor
Lights
On/Off
Job hours
reset button
Track speed
High/Low
Grinding hoursScreen On/Off
Tub rotation
forward/reverse
Tub
Up/Down
Conveyor
on/off
Remote radio/Local switch
Conveyor up/down
Conveyor fold/unfold
Radio start
Tub cover in/out, up/down
To Next Page
Loading...