DURKOPP ADLER Class 271 - 7.3.11 Status and Error Messages in the V820 Control Panel; 7.3.12 Seam Programming with the V820 Control Panel

To Next Page

To Previous Page

7.3.11 Status and Error Messages in the V820 Control Panel

See Chapter 7.1.8

7.3.12 Seam Programming with the V820 Control Panel

A maximum of 8 programs with a total maximum of 40 seam runs can be generated.

The beginning bartack, end bartack, stitch counting, thread trimming and foot lift

functions can be individually assigned to each seam.

Description see Operating Instructions "

EFKA DA220C 5300