DURKOPP ADLER Class 271 - 8.2 Control Panel OC-TOP (Optional Equipment); 8.2.1 Operating and Indicator Elements in the OC-TOP Control Panel; Functions of the Keys in the OC-TOP Control Panel

To Next Page

To Previous Page

8.2 Control Panel OC-TOP (Optional Equipment)

8.2.1 Operating and Indicator Elements in the OC-TOP Control Panel

Functions of the Keys in the OC-TOP Control Panel

It is possible to turn functions on or off by briefly pressing keys on the control panel.

The functions are only then in effect on the machine if the corresponding devices (e.g.

solenoidal or electropneumatic sewing foot lift) are present.

Key Function Indicator

1 A +/- Programming key Change of the value in the display

1 B +/- Programming key Change of the value in the display

1 C +/- Programming key Change of the value in the display

1 D +/- Programming key Change of the value in the display

1 P +/- Programming key Change of the value in the display

1 S +/- Programming key Change of the value in the display

1 L +/- Programming key Change of the value in the display

2 Beginning bartack on/off LED in the key

3 End bartack on/off LED in the key

4 Bartack suppression or bartack LED in the key

call up

If beginning or end bartack are The LED is lit when the

turned on, pressing the key will

turn off the next bartack. key is pressed. It becomes

dark when the next bartack is turned

If beginning or end bartack are off- on or off accordingly.

turned off, pressing the key will

turn the next bartack on.

5 (P/M) Manual sewing LED in the key dark

Programmed sewing LED in the key lit

A B C D P S L

F1 F2 F3 F4 F5